Knowledge article

What are CMR substances and why should they be phased out of construction materials?

Published 17 Nov 2026

CMR substances are a group of chemical substances that can cause particularly serious effects on human health. The abbreviation stands for Carcinogenic, Mutagenic and Reprotoxic substances. In this article, we take a closer look at what CMR substances are and how they can be phased out.

Within the EU, CMR substances are considered some of the most problematic chemicals because they can cause cancer, damage genetic material, or affect fertility and fetal development.

The construction and civil engineering sector has long aimed to reduce and, in the long term, phase out the use of particularly hazardous substances. This is a very important part of the work towards non-toxic material choices, healthy indoor environments, and a circular economy. In the BASTA-system, CMR properties are one of the most important criteria areas used to assess construction and civil engineering products.

What does CMR mean?

C – Carcinogenic substances are substances that can cause cancer or increase the risk of developing cancer. The effects may occur long after exposure, sometimes several decades later. This is why it is important to limit exposure today.

M – Mutagenic substances can cause changes to genetic material, known as mutations. Damage to DNA can affect the normal function of cells and, in some cases, contribute to the development of cancer or other diseases.

R – Substances toxic to reproduction can affect human reproductive capacity or harm fetal development. The effects may include reduced fertility, birth defects, or adverse effects on children’s development.

How are CMR substances classified?

Within the EU, the classification of chemical substances is regulated by the CLP Regulation (Classification, Labelling and Packaging). CMR substances are divided into different categories depending on the strength of the evidence for their hazardous properties. The most serious are:

  • Category 1A – substances known to cause CMR effects in humans.
  • Category 1B – substances presumed to cause these effects in humans based on strong scientific evidence.

These are the categories that are primarily subject to the strictest requirements under chemicals legislation.

Why are CMR substances an important issue for the construction sector?

Construction products are often used for a very long time. Materials installed today may remain in buildings for several decades before they are replaced or the building is demolished. Chemical choices can therefore have consequences far into the future.

Throughout the life cycle of a construction product, people may be exposed to its contents at several different stages, for example during manufacturing, during the use of the building, during maintenance and renovation, during demolition, and during recycling or reuse.

The longer a substance remains in society’s material flows, the greater the risk that people or the environment may be exposed to it. Preventive measures are therefore particularly important for substances associated with serious health effects.

Choosing construction products without CMR substances contributes to:

  • safer working environments
  • healthier indoor environments
  • reduced exposure to hazardous chemicals
  • greater safety for future generations

This is also in line with Sweden’s environmental quality objective of a non-toxic environment and the EU’s work on sustainable products.

CMR substances and the circular economy

One of the strongest arguments for phasing out CMR substances from construction materials is their impact on the circular economy. For materials to be safely reused and recycled, they need to be free from substances that could create new health or environmental problems.

If construction materials contain CMR substances, several challenges can arise. For example, the materials may become more difficult to recycle, reuse may be hindered, waste management may become more complicated, and hazardous substances may be transferred into new products.

The construction sector is undergoing a major transition towards increased reuse, material recycling, and resource efficiency. For this transition to succeed, the materials circulating in society need to be as free from hazardous substances as possible.

The link to REACH and SVHC substances

CMR substances have a special status under the EU chemicals legislation REACH and CLP. Substances classified as carcinogenic, mutagenic, or toxic to reproduction in Category 1A or 1B may be identified as SVHCs (Substances of Very High Concern).

When a substance is added to the Candidate List under REACH, specific information requirements apply to suppliers. In the longer term, the substance may also become subject to authorisation or restriction procedures. The aim is to encourage substitution, meaning that hazardous substances are replaced with less hazardous alternatives where such alternatives are available.

CMR substances in the BASTA-system


The BASTA-system is based on the principle that particularly hazardous substances should be phased out of construction and civil engineering products. The system’s criteria are based on, among other things, REACH, the CLP Regulation, and the Swedish Chemicals Agency’s PRIO system. CMR is one of the eleven criteria areas within the area of health and environmental hazards.

When products are assessed, the presence of substances with carcinogenic, mutagenic, or reproductive toxic properties is reviewed as part of the basis for the product’s BASTA assessment. If a product contains a substance classified as CMR and the concentratio exceeds the concentration limit, it receives a rating of DECLARED or BETA, depending on the hazard level of the CMR classification.

By requiring transparent disclosure of chemical content and applying clear criteria, BASTA helps the construction industry identify and select products containing less hazardous chemicals. The aim is to make it easier for manufacturers, contractors, consultants, property owners, and developers to make well-informed product choices.
You can read more about REACH and BASTA here: EU REACH – SVHC

To view data for a specific product, search for it in our open search engine, Search, open the product entry, and review its data and the criteria it meets.