Miljöyggnad
What is Miljöbyggnad?
Miljöbyggnad is a Swedish certification system for sustainable buildings, with a focus on environmental performance, health, and energy efficiency. The system serves as a tool for planning, implementing, and quality-assuring environmental and sustainability efforts throughout a building’s lifecycle. A key aspect of the certification is reducing the occurrence of hazardous substances in construction products while ensuring proper documentation of the building materials used.
The certification covers fifteen indicators related to energy use, climate impact, indoor and outdoor environments, and circularity. There are three certification levels: Gold, Silver, and Bronze.
Several criteria areas within the BASTA system can be used to demonstrate compliance with various Miljöbyggnad indicators. These include areas such as Health and environmental hazard assessment, Emissions (Miljöbyggnad – Phase-out of hazardous substances), Environmental impact and EPD data (Miljöbyggnad – Climate impact), Circularity (Miljöbyggnad – Circular material flows), and whether an eBVD (electronic construction product declaration) is linked to the product.
More information
Read more about Miljöbyggnad and its criteria here: Miljöbyggnad - Sweden Green Building Council
What does it look like on a product?

Phase-out of hazardous substances in construction products
One of Miljöbyggnad’s indicators focuses on the phase-out of hazardous substances. The purpose is to limit the use of chemical substances with properties that may be harmful to human health and the environment in construction products.
BASTA supports this work by:
- Setting clear requirements for the chemical content of construction products
- Providing assessments based on current chemicals legislation and hazard classifications
- Offering guidance on which Miljöbyggnad level a product can meet
The level and scope of the requirements vary between different versions of Miljöbyggnad. Products that are registered and assessed in BASTA provide a structured and reliable basis for demonstrating compliance with chemical content requirements.
Documentation of construction products and logbook
All versions of Miljöbyggnad include an indicator related to the documentation of the construction products used in a building. This indicator focuses on traceability and transparency and is not a chemical assessment in itself.
BASTA can support this work by:
- Indicating whether a product has an Electronic Construction Product Declaration (eBVD) linked to it
- Providing a logbook service that enables construction products used in a project to be documented in a structured manner
The BASTA system is integrated with eBVD, and links to available declarations are displayed directly on each product page in BASTA. This makes it easy to meet Miljöbyggnad’s documentation requirements while ensuring that the right information is available throughout the building’s entire lifecycle.
More information about each indicator is provided below.
Criteria
Indicator 9 – Phase-out of hazardous substances
Miljöbyggnad 4.X
Indoors
BSAB codes covered:
For products intended for indoor use and classified under the following BSAB codes: E, F, G, H, I, J, K, L, M, N, and Z. Chemical products registered under code 000 are also included.
Content requirements – Bronze
- Candidate list
BASTA criteria that must be met
-
H11.A
Content requirements – Silver
- Candidate list
- Phase-out substances
- Risk reduction substances
BASTA criteria that must be met
- H1.A, H1.B, H1.C, H1.D, H1.E, H1.G, H1.H, H2.A, H2.B, H3.A, H3.B, H3.C, H3.D, H3.E, H3.F, H4.A, H4.B, H4.C, H4.D, H5.A, H6.A, H7.B, H7.C, H7.D, H8.A, H8.B, H8.E, H10.B, H10.D, H11.A
Content requirements – Gold
- Candidate list
- Phase-out substances and risk reduction substances
- EU Taxonomy, Appendix C
- Emission values for formaldehyde and carcinogenic volatile organic compounds (VOCs)
- Compliance with EU-LCI values
BASTA criteria that must be met
- H1.A, H1.B, H1.C, H1.D, H1.E, H1.F, H1.G, H1.H, H2.A, H2.B, H3.A, H3.B, H3.C, H3.D, H3.E, H3.F, H4.A, H4.B, H4.C, H4.D, H5.A, H6.A, H7.B, H7.C, H7.D, H8.A, H8.B, H8.E, H10.B, H10.D, H11.A
- E2 & E3: Emission values for formaldehyde and carcinogenic volatile organic compounds
- EU-LCI – not assessed within the BASTA system
Outdoors
BSAB codes covered:
For products intended for indoor use and classified under the following BSAB codes: E, F, G, H, I, J, K, L, M, N, and Z. Chemical products registered under code 000 are also included.
Content requirements - Bronze
- Candidate list
BASTA criteria that must be met
- H11.A
Content requirements - Silver
- Candidate list
- Phase-out substances
- Risk reduction substances
BASTA criteria that must be met
- H1.A, H1.B, H1.C, H1.D, H1.E, H1.G, H1.H, H2.A, H2.B, H3.A, H3.B, H3.C, H3.D, H3.E, H3.F, H4.A, H4.B, H4.C, H4.D, H5.A, H6.A, H7.B, H7.C, H7.D, H8.A, H8.B, H8.E, H10.B, H10.D, H11.A
Content requirements - Gold
- Candidate list
- Phase-out substances and risk reduction substances
- EU Taxonomy, Appendix C
BASTA criteria that must be met
- H1.A, H1.B, H1.C, H1.D, H1.E, H1.F, H1.G, H1.H, H2.A, H2.B, H3.A, H3.B, H3.C, H3.D, H3.E, H3.F, H4.A, H4.B, H4.C, H4.D, H5.A, H6.A, H7.B, H7.C, H7.D, H8.A, H8.B, H8.E, H10.B, H10.D, H11.A
Indicator 14 – Phase-out of hazardous substances
Miljöbyggnad 3.X
Indoors
BSAB codes covered:
For products intended for indoor use and classified under the following BSAB codes: E, F, G, H, I, J, K, L, M, N, and Z. Chemical products registered under code 000 are also included.
Content requirements – Bronze
- Candidate list
BASTA criteria that must be met
- H11.A
Content requirements – Silver
- Candidate list
- Phase-out substances
- Endocrine-disrupting substances according to EDS
BASTA criteria that must be met
- H1.A, H1.C, H1.E, H2.A, H3.A, H3.B, H3.D, H3.E, H3.F, H4.A, H4.B, H4.C, H4.D, H5.A, H6.A, H7.B, H7.C, H11.A
Content requirements – SGold
- Candidate list
- Phase-out substances
- Risk reduction substances
- Endocrine-disrupting substances according to EDS
- Compliance with EU-LCI values
BASTA criteria that must be met
-
H1.A, H1.B, H1.C, H1.D, H1.E, H1.G, H1.H, H2.A, H2.B, H3.A, H3.B, H3.C, H3.D, H3.E, H3.F, H4.A, H4.B, H4.C, H4.D, H5.A, H6.A, H7.B, H7.C, H7.D, H8.A, H8.B, H8.E, H10.B, H10.D, H11.A
- EU-LCI – not assessed within the BASTA system
Outdoors
BSAB codes covered:
For products intended for indoor use and classified under the following BSAB codes: E, F, G, H, I, J, K, L, M, N, and Z. Chemical products registered under code 000 are also included.
Content requirements - Bronze
- Candidate list
BASTA criteria that must be met
- H11.A
Content requirements - Silver
- Candidate list
- Phase-out substances
- Endocrine-disrupting substances according to EDS
BASTA criteria that must be met
- H1.A, H1.C, H1.E, H2.A, H3.A, H3.B, H3.D, H3.E, H3.F, H4.A, H4.B, H4.C, H4.D, H5.A, H6.A, H7.B, H7.C, H11.A
Content requirements - Guld
- Candidate List
- Phase-out substances
- Risk reduction substances
- Endocrine-disrupting substances according to EDS
BASTA criteria that must be met
-
H1.A, H1.B, H1.C, H1.D, H1.E, H1.G, H1.H, H2.A, H2.B, H3.A, H3.B, H3.C, H3.D, H3.E, H3.F, H4.A, H4.B, H4.C, H4.D, H5.A, H6.A, H7.B, H7.C, H7.D, H8.A, H8.B, H8.E, H10.B, H10.D, H11.A
Logbook of construction products
Miljöbyggnad 4.X
Indicator 15 – Logbook of construction products
BSAB codes covered:
The following applies to products that are used and classified under the BSAB codes E, F, G, H, I, J, K, L, M, N, and Z. An eBVD for BSAB codes P, Q, and R is required only for the Gold level. Chemical products registered under code 000 are also included.
Content requirements – Bronze
- No requirements
Kriterier som måste uppfyllas i BASTA-systemet
- -
Content requiremens - Silver
- The product has an eBVD or equivalent documentation
BASTA criteria that must be met
- An eBVD is linked to the product
Content requirements - Gold
-
The product has an eBVD or equivalent documentation
-
The location and quantity of the products are specified in the logbook
BASTA criteria that must be met
- An eBVD is linked to the product
Miljöbyggnad 3.X
Indicator 13 - Logbook of construction products
BSAB codes covered:
The following applies to products used and classified under the BSAB codes E, F, G, H, I, J, K, L, M, N, and Z. An eBVD for BSAB codes P, Q, and R is required only for the Gold level. Chemical products registered under code 000 are also included.
Content requirements - Bronze
- No requirements
BASTA criteria that must be met
- -
Content requirements - Silver
- The product has an eBVD or equivalent documentation.
BASTA criteria that must be met
-
An eBVD is linked to the product.
Content requirements - Gold
- The product has an eBVD or equivalent documentation.
-
The location and quantity of the products are specified in the logbook.
BASTA criteria that must be met
- An eBVD is linked to the product
Climate impact
Miljöbyggnad 4.X
Indicator 4 - CLIMATE IMPACT
BSAB codes covered:
Climate calculations and climate declarations must be carried out in accordance with the National Board of Housing, Building and Planning's handbook on climate declarations for Bronze, as well as for limit values according to Silver and Gold.
Reference to specific BSAB codes is missing.
Requirements - Bronze
- The building's climate impact from life cycle modules A1–A5 is reported in accordance with the National Board of Housing, Building and Planning's regulations for climate declarations.
BASTA criteria that must be met
- -
Requirements - Silver
- Maximum climate impact of life cycle modules A1–A5 as shown in Table 4.1.
See Miljöbyggnad's manual for more information about the maximum climate impact for Silvers and Gold.
BASTA criteria that must be met
- -
Requirements - Gold
-
Maximum climate impact of life cycle modules A1–A5 as shown in Table 4.1.
-
The building's climate impact throughout its life cycle.
See Miljöbyggnad's manual for more information about the maximum climate impact for Silvers and Gold.
BASTA criteria that must be met
- -
Miljöbyggnad 3.X
Indicator 15 - THE CLIMATE IMPACT OF THE FRAME AND FOUNDATION
BSAB codes covered:
Regardless of the type of building: building products in the foundation structure and frame.
Reference to specific BSAB codes is missing.
Requirements - Bronze
- Climate impact in the production of construction products, i.e. A1, A2 and A3 with generic data.
BASTA criteria that must be met
- -
Requirements - Silver
- Climate impact on the production and transport of construction materials, i.e. A1, A2, A3 and A4.
- At least 50% of the climate impact of the production of the construction products is based on product-specific EPDs.
- The climate impact of transport is calculated using generic data for transport modes and actual transport distances.
BASTA criteria that must be met
- -
Requirements - Gold
-
Climate impact on the production and transport of construction materials, i.e. A1, A2, A3 and A4.
-
At least 70% of the climate impact of the production of the construction products is based on product-specific EPDs.
-
The climate impact of transport is calculated using generic data for transport modes and actual transport distances.
- The climate impact of A1, A2, A3 and A4 in g CO2e/m2Atemp should be 10% lower than SILVER.
BASTA criteria that must be met
- -
Circular materialflow
Miljöbyggnad 4.X
Indicator 13 - CIRCULAR MATERIALFLOW
BSAB codes covered:
Reference to specific BSAB codes is missing.
Requirements - Bronze
- At least two construction products must contain at least 10% of recycled material by weight.
- The product has an eBVD or equivalent documentation.
BASTA criteria that must be met
- The proportion of recycled material/raw material in the product is at least 10% by weight (C1)
- An eBVD is linked to the product
Requirements - Silver
- At least three construction products must contain at least 20% recycled material by weight.
Or - At least 20% by weight of at least one type of construction product must be reused.
- The product has an eBVD or equivalent documentation.
BASTA criteria that must be met
- The proportion of recycled material/raw material in the product is at least 20% by weight (C1)
- The proportion of reused material/raw material in the product is at least 20% by weight (C1)
- An eBVD is linked to the product
Requirements - Gold
-
At least 20% by weight of at least two types of construction products must be reused.
Eller
-
At least 40% by weight of at least one type of construction products must be reused.
- The product has an eBVD or equivalent documentation.
BASTA criteria that must be met
-
The proportion of reused material/raw material in the product is at least 20% by weight (C1)
-
An eBVD is linked to the product.